Encoders Absolute multiturn
|
|
-
Data sheet
DE EN FR
Product is discontinued
A new / comparable product is available for this product.
To the new product
For real-time communication: Industrial Ethernet encoders with EtherNet/IP interface.
The absolute encoders Singleturn Sendix F5868 / F5888 with EtherNet/IP interface and a resolution of up to 16 bits are designed for time-critical applications. Thanks to their special features, due to the patented Intelligent Scan Technology™, they not only support the performance and availability of your plant, but also make a major contribution to saving time and money.
Connectivity stands for the ability to communicate additional information and / or to be integrated in a network. This can take the form of additional interfaces such as OPC-UA (e.g. for additional edge communication) or Industrial Ethernet communication as well as a digital interface such as "BISS" or "SCS open link".
Identification is the ability to transmit technical information by means of an electronic data sheet / type plate. In addition, further information about the machine can be transmitted (e.g. information about the axis where the encoder is installed). Essentially, all the information required in the application for asset management is recorded here.
Learn more
- Technical data
- Benefits
- Downloads
- Accessories
- Cables and connectors
| Mechanical | |
|---|---|
| Dimension | Ø 58 mm |
| Shaft type | 3/8 " hollow shaft, blind hole 10 mm hollow shaft, blind hole 12 mm hollow shaft, blind hole 14 mm hollow shaft, blind hole 15 mm hollow shaft, blind hole 1/2 " hollow shaft, blind hole |
| Flange type | Ø 58.00 mm Ø 63.00 mm Ø 65.00 mm Ø 73.40 mm |
| Working temperature | -40 °C ... +80 °C |
| Protection level | IP65 |
| Connection types | M12 connector axial |
| Max. rotational speed | 6.000 min-1 |
| Weight | 450 g |
| Electrical | |
|---|---|
| Scanning | optical |
| Resolution max. | 16 bits singleturn 16 bits multiturn |
| Power supply | 10...30 V DC |
| Interfaces | EtherNet/IP |
Latest EtherNet/IP functionality
- Fast, simple commissioning and configuration via cyclic services possible.
- Low RPI time of at least 1 ms - thus the encoder can be used for time-critical applications up to 1000 Hz update frequency.
- Fast start of the encoder after applying the power supply - this increases the system performance.
Reliable and insensitive
- Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
- Patented Intelligent Scan Technology™ with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 32 bit and 100% magnetic insensitivity.
- Through the implementation of DLR (Device Level Ring), a single cable break does not cause the plant to come to a standstill.
| Data sheet | ||
|---|---|---|
| Sendix F5868 / F5888 EtherNet/IP PDF ∼ 863,8 KB | 05.2024 | DE EN FR |
| Operation Manual | ||
|---|---|---|
| Operation manual for encoders Multilingual: German, English, FrenchPDF ∼ 2,9 MB | 09.2022 | | |
| Operating manual for encoders with ATEX 2/22 Multilingual: German, English, French, Italian, SpanishPDF ∼ 3,6 MB | 05.2023 | |
| Manual | ||
|---|---|---|
| Sendix F58x8 EtherNet/IP PDF ∼ 12,6 MB | 11.2023 | DE EN FR |
| Safety characteristics | ||
|---|---|---|
| Sendix F5888 MTTFd Multilingual: German, EnglishPDF ∼ 157,9 KB | 06.2019 | |
| Declaration of conformity | ||
|---|---|---|
| Sendix F5858 / F5878 / F5868 / F5888 EtherNet/IP CE Multilingual: German, English, FrenchPDF ∼ 410,0 KB | 04.2016 | |
| Device file | ||
|---|---|---|
| Sendix F58xx Multiturn Ethernet/IP ZIP ∼ 15,0 KB | 01.2021 | |
| Mechanical CAD / STEP | ||
|---|---|---|
| Sendix F5878 / F5888 ZIP ∼ 17,4 MB | 01.2023 | |
| Electronic CAD / ePlan | ||
|---|---|---|
| Sendix F5868 / F5888 EtherNet/IP A2 ZIP ∼ 3,1 MB | 02.2020 | |
| Product Certificates | ||
|---|---|---|
| Encoder UL USA PDF ∼ 78,2 KB | 11.2019 | EN | |
| Encoder UL Canada PDF ∼ 79,9 KB | 11.2019 | EN | |
| Salt spray test ManufacturersDeclaration PDF ∼ 39,6 KB | 05.2023 | DE EN | |
| Sendix F58x8 Ethernet/IP Certificate 2015 PDF ∼ 58,8 KB | 11.2015 | EN |
| Product video | ||
|---|---|---|
| Sendix F58 - EtherNet/IP PLC-Integration | Website |
Accessories
Bellows coupling
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.
Bellows coupling (stainless steel).
| 8.0000.1102.XXXX |
| Data sheet Bellows and spring washer couplings | DE EN FR |
| Mechanical CAD / STEP Bellows and spring washer couplings |
Assembly bell
For shaft encoders with flange ø 50 ... 58 mm
Fast encoder mounting. Electrical and thermal insulation through glass-fibre reinforced plastic and insulating spring washer coupling - complete delivery as a set.
Scope of delivery
- Mounting bell
- Spring washer coupling (8.0000.1401.XXXX)
- Mounting eccentric (8.0000.4B00.0000)
- Mounting accessories
| 8.0000.4500.XXYY |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0000.4500.XXXX |
Adapter flange, square, 4 mm
For shaft encoders with clamping flange ø 50 ... 58 mm
Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 4 screws
| 58,0 mm x 4 mm | 8.0010.2100.0000 |
| 63,5 mm x 3 mm | 8.0010.2120.0000 |
| 70,0 mm x 10 mm | 8.0010.2600.0000 |
| 80,0 mm x 4 mm | 8.0010.2800.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2100.0000 |
Flange, Ø 115mm Euroflange
For shaft encoders with flange ø 50 ... 58 mm
Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder
Connection to the application (not included in delivery)
- 6 screws
| Drehgeber 580x/5000 | 8.0010.2160.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2160.0000 |
Flange, Ø 58mm
For shaft encoders with flange ø 50 ... 58 mm
Adapter for converting a clamping flange into a synchro flange.
Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 3 screws
| 8.0010.2180.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2180.0000 Accessories flange / CAD |
Flange, Ø 65mm
For shaft encoders with flange ø 50 ... 58 mm
With this flange adapter, Kübler encoders of size 58 mm can replace third-party encoders of size 65 mm.
Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 3 screws
| 8.0010.2230.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2230.0000 |
Flange, Ø 90mm
For shaft encoders with flange ø 50 ... 58 mm
Adapter for converting a clamping flange into a synchro flange. Mechanically compatible with encoder type 9000.
Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder
Connection to the application (not included in delivery)
- 6 screws
| 8.0010.2270.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2270.0000 |
Angular flange
For shaft encoders with flange ø 50 ... 58 mm
Scope of delivery
- Angle flange (aluminium)
- 3 screws for fastening to the encoder.
Connection to the application (not included in delivery)
- 2 screws
| 8.0010.2300.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2300.0000 |
Torque stop, flexible
For hollow shaft encoders
with flange ø 58 mm
Mounting radius 39.5 ... 142.75 mm
Designed for functional safety technology.
For applications with axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 M3x6 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 1 screw
| 8.0010.4047.00FS |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.4047.00FS | |
| Operation Manual 8.0010.4047.00FS - Accessories torque stop, flexible (FS) |
Fastening arm set, rigid
For hollow shaft encoders
with flange ø 58 mm
Mounting radius 32.5 ... 143.5 mm
Designed for functional safety technology.
For applications with very low axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 screws M3x6 for mounting to the encoder
Connection to the application (not included in delivery)
- 1 torque pin 8.0010.4049.0075
| 8.0010.4051.00FS |
| Mechanical CAD / STEP 8.0010.4051.00FS | |
| Operation Manual 8.0010.4051.00FS - Accessories torque stop, rigid (FS) |
Stator coupling (FS)
For hollow shaft encoders
with flange ø 58 mm
Mounting radius 31.5 mm
Designed for functional safety technology by 4-screw principle.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws M3x6 for mounting to the encoder
Connection to application (not included in delivery)
- 4 screws
| 8.0010.40B2.00FS |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.40B2.00FS | |
| Operation Manual Supplement to stator coupling operating instructions (FS) |
Fastening eccentrics
For shaft encoders with synchro flange ø 50 ... 70 mm
Scope of delivery
- 3 eccentric
- 3 screws
| 8.0010.4100.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.4100.0000 |
Bearing box
For shaft encoder with clamping flange ø 58 mm and shaft 10 x 20 mm
When the encoder is driven by a toothed or chain wheel, V-belt or toothed belt, impeller, etc., the permissible axial or radial shaft loads are usually exceeded during operation. For these cases, the bearing box equipped with reinforced bearings is ideally suited.
Scope of delivery
- Bearing box with lock and O-ring
- Coupling for shaft 10 mm
- Adapter flange 8.0010.2100.0000
- Mounting accessories
| 8.0010.8200.0004 |
| Data sheet Bearing box | DE EN FR |
Robust bearing unit
For shaft encoders with clamping flange ø 50 ... 58 mm and shaft 10 mm
The separation of the bearing load and the sensor system provides the encoder with additional protection in harsh environments.
Scope of delivery
- Robust bearing unit
- 3 x cheese head screw M4x25 (SW3)
- 1 x O-ring
| 8.0010.8200.000C |
| Data sheet Robust bearing unit | DE EN FR |
| Installation manual Robust bearing unit |
Cables and connectors
M12 Connector with cable ,
Preassembled cable set
Male connector 4-pinPUR Ø 6,5 mm ± mm
2 x 2 x 0,34 mm2
05.00.6031.4411.XXXM
| Data sheet M12 cable satez, PUR, pin, 4-pin, D-coded, open end | DEENFR |
M12 Connector with cable ,
Preassembled cable set
Male connector 4-pin
↓
Male connector 4-pinPUR Ø 6,5 mm ± 0,2 mm
2 x 2 x 0,34 mm2
05.00.6031.4444.XXXM
| Data sheet M12 cable set, PUR, 2xpin, 4-pin | DEENFR |
M12 Connector with cable ,
Preassembled cable set
Male connector 4-pinPUR Ø 6,5 mm ± 0,2 mm
2 x 2 x 0,34 mm2
05.00.6031.4511.XXXM
| Data sheet M12 cordset, PUR, male, angled, 4-pin, D-coded, open end | DEENFR |
M12 Connector with cable ,
Preassembled cable set
Male connector 4-pin
↓
Male connector 4-pin
05.00.6031.4544.XXXM
| Data sheet M12 cordset, PUR, male straight - angled, 4-pin, D-coded | DEENFR |
RJ45 Connector with cable , Ethernet cable
Preassembled cable set
Male connector 8-pin
↓
Male connector 4-pinPUR Ø 6,5 mm ± mm
4 x 0,34 mm2
05.00.6031.7444.XXXM
| Data sheet Cordset RJ45 connector + M12 pin, 4-pin, D-coded, PUR cable, Profibus | DEENFR |
M12 Connector with cable , mit Edelstahl Überwurf
Preassembled cable set
Male connector 4-pinPUR Ø 6,5 mm ± mm
1 x 4 x AWG22 mm2
05.00.6031.G411.XXXM
| Data sheet M12, PUR, male, 4-pin, D-coded, stainless steel + open 05.00.6031.G411 | DEENFR |
M12 Connector with cable , mit Edelstahl Überwurf
Preassembled cable set
Male connector 4-pin
↓
Male connector 4-pinPUR Ø 6,5 mm ± mm
1 x 4 x AWG22 mm2
05.00.6031.G4G4.XXXM
| Data sheet M12, PUR, male, 4-pin, D-coded, stainless steel | DEENFR |
M12 Connector with cable , mit Edelstahl Überwurf
Preassembled cable set
Male connector 4-pinPUR Ø 6,5 mm ± mm
1 x 4 x AWG22 mm2
05.00.6031.G511.XXXM
| Data sheet M12, PUR, male angled, 4-pin, D-coded, stainless steel | DEENFR |
M12 Connector with cable ,
Preassembled cable set
Female connector 4-pinPUR Ø 4,7 mm ± mm
4x0,34 mm2
05.00.6061.6211.XXXX
| Data sheet M12 cordset, PUR, socket, 4-pin, A-coded, open end | DEENFR |
M12 Connector with cable ,
Preassembled cable set
Male connector 4-pinPUR Ø 4,7 mm ± 0,2 mm
4x0,34 mm2
05.00.6061.6311.xxxM
| Data sheet M12 cordset, PUR, socket, angled, 4-pin, A-coded, open end | DEENFR |
M12 Connector with cable ,
Preassembled cable set
Female connector 4-pin
↓
Male connector 4-pinPUR Ø 4,7 mm ± 0,2 mm
4 x 0,34 mm2
05.00.6061.6462.XXXM
| Data sheet M12 cordset, PUR, socket, 4-pin, A-coded + pin | DEENFR |
M12 Connector with cable ,
Preassembled cable set
Female connector 4-pinPUR Ø 4,7 mm ± 0,2 mm
4 x 0,34 mm2
05.00.6061.D211.XXXM
| Data sheet M12 cordset, PUR, socket, V4A, 4-pin, A-coded, open end | DEENFR |
M12 Connector with cable , mit Edelstahl Überwurf
Preassembled cable set
Female connector 4-pinPUR Ø 4,7 mm ± mm
4 x 0,34 mm2
05.00.6061.D311.XXXM
| Data sheet M12, PUR, socket, 4-pin, A-coded, stainless steel | DEENFR |
M12 Connector with cable , mit Edelstahl Überwurf
Preassembled cable set
Male connector 4-pin
↓
Female connector 4-pinPUR Ø 4,7 mm ± mm
4 x 0,34 mm2
05.00.6061.D4D2.XXXM
| Data sheet M12, PUR, socket, 4-pin, A-coded, stainless steel + pin 05.00.6061.D4D2 | DEENFR |
M12 Connector ,
Field-wireable connector
Female connector 4-pin
05.B8141-0
| Data sheet M12 socket, 4-pin, A-coded | DEENFR |
M12 Connector ,
Field-wireable connector
Female connector 4-pin
05.B8241-0
| Data sheet M12 socket, angled, 4-pin, A-coded | DEENFR |
M12 Connector ,
Field-wireable connector
Male connector 4-pin
05.WASCSY4S
| Data sheet M12 pin, 4-pole, D-coded | DEENFR |
M12 Connector , for the Ex-area
Field-wireable connector
Male connector 5-pin
8.0000.5121.0000.Ex
| Data sheet M12 pin, Ex 2/22, 5-pin, D-coded | DEENFR |
M12 Connector ,
Field-wireable connector
Male connector 4-pin
8.0000.5128.0000
| Data sheet M12 male, angled, 4-pin, D-coded | DEENFR |
„Do you have technical questions about Kübler encoders or are you looking for individual solutions? We at Application Support are here for you.“
Application support
Rainer Grueninger
Application Engineer
support@kuebler.com
+49 7720 3903 849
„We will be pleased to give you information about prices and delivery times. We are looking forward to your inquiry.“
Sales
Fritz Kübler GmbH
Sales Germany
info@kuebler.com
+49 7720 3903 871
+49 7720 21564
